Guides

Record care guides, from the groove to the stylus

Seven guides covering the whole job: cleaning a record, storing it so it stays clean, brushing a stylus without bending anything, emptying the brush that does the sweeping, sorting out why a record skips, and choosing between the two brush technologies that have split collectors for forty years.

Nick Talbot · Record care writer, 25 years of records

Nick has been buying records since the late nineties and keeps about 1,200 of them in an apartment that is louder than his neighbors would like. He writes the Tonebrush guides.

The Tonebrush three-piece set, the velvet block under its clear sliding cover, the stylus brush and the white detail brush, laid on a dark surface beside a record half out of its sleeve

· Nick Talbot

Why Does My Record Skip? Dust, Static, Scratches, or the Turntable

Four causes sorted by symptom: loose dust or lint, a loaded stylus, a scratch or warp, and the turntable itself. Which two a brush removes before the side plays, and what corrects the other two.

Read the guide →
The three-piece Tonebrush set on a wooden shelf between a row of records and a turntable

· Nick Talbot

How to Clean a Record Cleaning Brush: The Two-Minute Comb-Out

A velvet pad keeps everything it lifts, and a full one starts putting dust back. The three signs, the comb-out, when washing is safe, and when to replace it.

Read the guide →
A record on a turntable platter in a home listening room, lit from the side

· Nick Talbot

A Vinyl Record Care Routine You Will Actually Keep

Three tiers, forty seconds before a side and twenty after it, plus one monthly pass over the record player. With the checklist and the timings.

Read the guide →
A turntable and record shelf in a home listening room

· Nick Talbot

How to Clean a Record Player Needle Without Breaking It

Always back to front, never sideways, never backwards. The safe stroke, how often to do it, and what liquid cleaners actually risk.

Read the guide →
Close view of a record surface with a brush resting across the grooves

· Nick Talbot

Carbon Fiber vs Velvet Record Brush: A Comparison

What carbon fiber does better, what velvet does better, and where each design fails. Written by a company that sells the velvet kind.

Read the guide →
Records filed upright on a shelf in a home listening room

· Nick Talbot

How to Store Vinyl Records So They Stay Flat and Quiet

Upright always, stacked never, in anti-static inner sleeves and a stable room. Why the shelf decides how much cleaning your records need.

Read the guide →
Overhead view of the three stages of record care: the velvet block on a record, a microfiber cloth with a spray bottle, and a record in its inner sleeve

· Nick Talbot

How to Clean Vinyl Records: The Three Levels That Matter

Dry brushing before every play, a wet wash for used records, ultrasonic for the stubborn ones. Plus the five habits that permanently damage vinyl.

Read the guide →

Where to start

If you have just bought a turntable, read the care routine first. It is the shortest of the seven and it tells you what to do in the next ten minutes rather than in theory. If you have just brought home a crate of secondhand records, start with how to clean vinyl records, because a used disc needs one proper wash before it ever meets your stylus and no amount of brushing substitutes for it.

If a record skips, why does my record skip sorts the four causes by their symptom before you clean anything, and says which two a brush removes. If your records already sound noisy in a way that cleaning does not fix, the problem is usually where they live. How to store vinyl records covers upright filing, the temperature and humidity ranges federal archive guidance publishes, and why the inner sleeve is the first thing to replace. And if you are about to buy a brush and cannot decide, our carbon fiber versus velvet comparison sets both technologies against the same criteria, including the places where the carbon design beats the one we sell. And once you own a brush, how to clean a record cleaning brush covers the part almost everybody skips: emptying the pad before it starts putting dust back.

How these guides connect to the product

Tonebrush sells one thing, a three-piece brush set built around the daily part of record care: the velvet block for the record, the stylus brush for the cartridge, and the white nylon detail brush for the velvet itself.

Product pages sit separately: the record cleaning kit covers the full three-piece set, the anti-static record brush page covers the velvet block and the static question, and the stylus brush page covers the small angled piece for the diamond. Buyer feedback is on the reviews page, and the person who writes the guides is on the about page.

From $29.95 4.6 (151 reviews) Free shipping Secure payment 30-day guarantee See offer →